View ICL7660AMTV883B_527879.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SCOPE: SWITCHED-CAPACITOR VOLTAGE CONVERTER Device Type 01 Generic Number ICL7660AM(x)/883B SMD Number 5962-3870702
Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows: Outline Letter SMD MAXIM GC TV PA JA Mil-Std-1835 MACY1-X8 GDIP1-T8 or CDIP2-T8 Case Outline 8 LEAD CAN 8 LEAD CERDIP Package Code TO99 J8
Absolute Maximum Ratings Supply Voltage (V+ to GND, or GND to VOUT) .............................................................. 10.5V Input Voltage on N.C. Boost, LV, OSC 1/............................................ -0.3VVIN(V+ +0.3V) LV Input Current 1/.......................................................................................................... 20A Output Short-Circuit Duration (V+5.5V) ............................................................. Continuous Lead Temperature (soldering, 10 seconds) ....................................................................... +300C Storage Temperature .......................................................................................... -65C to +150C Continuous Power Dissipation ................................................................................... TA=+70C 8 lead CERDIP(derate 8.0mW/C above +70C) ........................................................... 640mW 8 lead CAN (derate 6.7mW/C above +70C) ............................................................... 533mW Junction Temperature TJ .............................................................................................. +150C Thermal Resistance, Junction to Case, JC: Case Outline 8 lead CERDIP........................................................................... 55C/W Case Outline 8 lead CAN............................................................................... 45C/W Thermal Resistance, Junction to Ambient, JA: Case Outline 8 lead CERDIP......................................................................... 125C/W Case Outline 8 lead CAN .............................................................................. 150C/W Recommended Operating Conditions. Ambient Operating Range (TA) ..................................................................... -55C to +125C
NOTE 1: Connecting any input terminal to voltages greater than V+ or less than ground may cause latchup. Do not apply any inputs from sources operating from external supplies before device power-up.
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
----------------------------
Electrical Characteristics of ICL7660AMxx/883B for /883B and SMD 5962-3870702
19-0161 Page 2 of
Rev. D 5
TABLE 1. ELECTRICAL TESTS CONDITIONS -55 C <=TA<= +125C V+=+5.0V, LV pin=0V,ILOAD=0mA Unless otherwise specified RL=, Boost and OSC = no connection, LV open RL=, Boost and OSC = no connection, LV open, V+=10.5V RL=, Boost and OSC = no connection, LV open, V+=10V RL=10k, LV open RL=10k, LV to GND IL =20mA, fOSC=5kHz, LV open IL =3mA, fOSC=2.7kHz, LV to GND V+=2V RL=5k, fOSC=5kHz, LV open RL=, LV open
TEST
Symbol
Group A Subgroup
Device type
Limits Min
Limits Max
Units
SWITCH Supply Current Supply Current 2/ Supply Current 2/ Supply Voltage Range 3/ Supply Voltage Range 3/ Output Resistance Output Resistance Power Efficiency Voltage Conversion Efficiency Output Voltage 2/ LV pin Voltage 2/
I+ I+ I+ V+ V+ ROUT ROUT
1 2,3 1 2,3 1 2,3
All All All All All All All All All
1,2,3 1,2,3 1 2,3 1 2,3 1 1
3.5 2.0 3.0 2.0 3.0 1.5
175 250 5.5 7.5 5.0 7.0 10.0 3.5 100 150 250 400
A mA mA V V % %
PEFF
VCEFF VOUT VLV
95 99
V+=10V V+=10V
1 2,3 1 2,3
All All
-9.4 -9.0 4.0 3.0
-10 -10 7.0 8.0
V V
NOTE 2: Guaranteed if not tested to the limits in Table 1. NOTE 3: ICL7660 can operate without an external output diode over the full temperature and voltage ranges. It can also be used with the external diode DX when replacing the Intersil ICL7660. Tests performed with DX out of circuit.
ORDERING SMD # 5962-3870702MPA 5962-3870702MGC
INFORMATION: Maxim # ICL7660AMJA/883B ICL7660AMTV/883B
Pkg. J8 TO99
Terminal Number 1 2 3 4 5 6 7 8
ICL7660 J8 (NC) BOOST CAP+ GND CAPVOUT LV OSC V+
ICL7660 TO99 (NC) BOOST CAP+ GND CAPVOUT LV OSC V+ and Case
----------------------------
Electrical Characteristics of ICL7660AMxx/883B for /883B and SMD 5962-3870702
19-0161 Page 3 of
Rev. D 5
QUALITY ASSURANCE
Sampling and inspection procedures shall be in accordance with MIL-Prf-38535, Appendix A as specified in MilStd-883. Screening shall be in accordance with Method 5004 of Mil-Std-883. Burn-in test Method 1015: 1. Test Condition, A, B, C, or D. 2. TA = +125C minimum. 3. Interim and final electrical test requirements shall be specified in Table 2. Quality conformance inspection shall be in accordance with Method 5005 of Mil-Std-883, including Groups A, B, C, and D inspection. Group A inspection: 1. Tests as specified in Table 2. 2. Selected subgroups in Table 1, Method 5005 of Mil-Std-883 shall be omitted. Group C and D inspections: a. End-point electrical parameters shall be specified in Table 1. b. Steady-state life test, Method 1005 of Mil-Std-883: 1. Test condition A, B, C, D. 2. TA = +125C, minimum. 3. Test duration, 1000 hours, except as permitted by Method 1005 of Mil-Std-883.
TABLE 2.
ELECTRICAL TEST REQUIREMENTS Mil-Std-883 Test Requirements Subgroups per Method 5005, Table 1 1 1*, 2, 3 1, 2, 3 1
Interim Electric Parameters Method 5004 Final Electrical Parameters Method 5005 Group A Test Requirements Method 5005 Group C and D End-Point Electrical Parameters Method 5005 * PDA applies to Subgroup 1 only.
----------------------------
Electrical Characteristics of ICL7660AMxx/883B for /883B and SMD 5962-3870702
19-0161 Page 4 of
Rev. D 5

▲Up To Search▲

Price & Availability of ICL7660AMTV883B

	To Download ICL7660AMTV883B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .